 |
| Abit IT7 MAX2 v2.0 (845PE) Motherboard : Intro and Specs |
|
|
|
What do you get when you take the IT7 MAX2 from Abit and replace the 845E North bridge with the newer 845PE North bridge? Why, the IT7 MAX2 v2.0 of course- What else did you expect? There really isn’t much difference between the two versions of the board besides the North bridge and a couple of minor modifications. But what about the performance and overclocking? Lets find out.
 |
|
CPU: |
Supports 400/533MHz System Data Bus Intel Pentium® 4 Socket478 processor |
| Chipset: |
Intel 845PE+ICH4 chipset |
| Memory: |
Three 184-pin DIMM sockets support DDR SDRAM modules. Max 2.0 GB |
| Audio: |
Realtek ALC650 (AC-Link) supports 6CH DAC for AC3 5.1 CH purpose |
| IDE/SCSI: |
Supports Dual Ultra ATA/100,Ultra ATA/66,Ultra ATA/33 channels supporting 4 devices
High Point HPT374 IDE Controller Ultra DMA 133/ RAID
On board 2-Channel Serial ATA interface of 1.5 G bps |
| I/O Connectors: |
2 x PS/2, 1 x Media, 10 x USB, 3 x 1394, 1 x Optical, 1 x RJ-45 |
| Expansion Slots: |
1 x AGP, 4 x PCI |
| Additional Features: |
SoftMenu™ III Technology to set CPU parameters |
| Form Factor: |
ATX Form Factor- 304.8mm x 243.8mm |
|
|
|
|
|
 |
|
 |
Copyright © 1999 - 2004 t-break Information Technology.
All rights reserved. For any Comments or Questions: abbas@tbreak.com
|
